Conditions of Use

    OF:
    HAJÉ Electronics
    Oude Kerkstraat 7
    6325EE Berg en Terblijt
    The Netherlands

    Hereinafter to be referred to as: user.

Article 1    Definitions

  1. In the present general terms and conditions, the following terms are used in the sense given below, unless explicitly indicated otherwise.

  2. User: the user of the general terms and conditions.
    Buyer: the user's opposite party, acting in the course of a business or in the course of a profession.
    Agreement: the agreement between the user and buyer.

Article 2    General

  1. The stipulations of the present terms and conditions shall apply to each and every offer and agreement between user and a buyer, to which user has declared the present terms and conditions applicable, insofar as parties have not explicitly deviated from the present terms and conditions in writing.
  2. The present terms and conditions shall also apply to all agreements with user, the execution of which calls for the services of third parties.
  3. The buyer's general terms and conditions shall only apply if parties have explicitly agreed in writing that said general terms and conditions shall apply to the present agreement with the exclusion of the present general terms and conditions. In that event possibly still conflicting stipulations in the user's and buyer's general terms and conditions shall only apply between parties, if and in so far that they are a part of user's general terms and conditions.
  4. If one or more stipulations in the present general terms and conditions should be null and void or declared null and void, then the other stipulations of the present general terms and conditions shall remain fully applicable. The case ensuing, user and buyer shall enter into negotiations to agree upon new stipulations replacing the null and void conditions, or, as the case may be, the conditions declared null and void, whereby the purpose and the meaning of the original conditions shall be heeded as far as possible.

Article 3    Offers and Tenders

  1. All offers shall be free of obligation unless the offer contains an acceptance term.
  2. The offers made by user shall be free of obligation; they shall be valid for a period of thirty days, unless indicated otherwise. User shall only be bound by the offers if the acceptance thereof is confirmed in writing by the buyer within thirty days.
  3. Terms of delivery given in user's offers shall only be tentative and exceeding these terms of delivery shall not entitle buyer to dissolution or damages, unless explicitly agreed upon otherwise.
  4. The prices given in above-mentioned offers and tenders shall be exclusive of VAT and other government levies, as well as of shipment costs and possible packaging and administration costs, unless explicitly stated otherwise.
  5. If the acceptance deviates (on secondary items) from the offer given, user shall not be bound by it. The agreement shall in such event not be concluded in accordance with said deviating acceptance, unless user indicates otherwise.
  6. A compound quotation shall not oblige user to execute part of the assignment against a corresponding part of the given quotation.
  7. Offers and tenders shall not apply automatically to repeat orders.

Article 4    Execution of the Agreement

  1. User shall execute the agreement to the best of his knowledge and ability.
  2. If and in so far required for the proper execution of the agreement, user shall have the right to have certain work done by third parties.
  3. The buyer shall see to it that user shall be provided in due time with all data which user has said to be necessary or which the buyer must in all reasonableness understand to be necessary to the execution of the agreement. If user has not been provided in due time with the data necessary to the execution of the agreement, user shall have the right to suspend the execution of the agreement and / or to charge the buyer for the additional costs resulting from the delay at the generally accepted rates.
  4. User shall not be liable for damage of whatever nature caused by the fact that user worked on the basis of incorrect and / or incomplete data provided by the buyer, unless user should have been aware of said incorrectness or incompleteness.
  5. If parties have agreed that the agreement will be executed in stages, user can suspend the execution of the parts belonging to a following stage until the buyer has approved in writing the results of the stage prior to it.
  6. If user or third parties engaged by user within the scope of the assignment do work at buyer's site or at a site designated by buyer, buyer shall provide the employees having to work there free of charge with all facilities desired in all reasonableness by said employees.
  7. Buyer shall safeguard user against possible claims filed by third parties who may sustain damage attributable to buyer in connection with the execution of the agreement.

Article 5    Delivery

  1. Delivery shall be made ex works/store/warehouse of user.
  2. If delivery is made on the basis of the "Incoterms", the "Incoterms" valid at the moment the agreement is concluded, shall apply.
  3. Buyer shall be held to take delivery of the goods the moment that user delivers them to him or has them delivered, or the moment at which the goods are put at buyer's disposal under the agreement.
  4. If the buyer refuses to take delivery or fails to give the information or instructions necessary to the delivery, user shall be entitled to store the goods at buyer's risk and expense.
  5. If the goods are serviced, user shall be entitled to charge possible service charges. Said service charges shall then be invoiced separately.
  6. If, in the framework of the execution of the agreement, user requires data to be given by the buyer, the term of delivery shall commence after the buyer has provided user with said data
  7. If user has given a term of delivery, it shall only be indicative. A given term of delivery shall therefore never constitute a term to be observed on penalty of forfeiture of rights. If a term is exceeded, the buyer must give user notice of default in writing.
  8. User shall be entitled to deliver the goods in parts, unless such is deviated from in writing in the agreement or if the partial delivery does not represent an independent value. User shall be entitled to invoice the thus delivered goods separately.
  9. If execution of the agreement in stages has been agreed upon, user can suspend the execution of the parts belonging to a following stage until the buyer has approved in writing the results of the stage prior to it.

Article 6    Samples and Models

  1. If a sample or model has been given to buyer, then the assumption is that such has been given by way of indication only, unless parties agree explicitly that the product to be delivered shall correspond with it.
  2. In the event of purchase of immovable property, the surface area or other measurements and indications given shall also be assumed to be merely indicative without any obligation to have the product to be delivered correspond with it.

Article 7    Inspection & Complaints

  1. Buyer shall be held to examine the delivered goods (to have the delivered goods inspected) the moment of delivery (handing over), but in any case in as short a period of time as possible. In this respect, buyer must examine whether the quality and the quantity of the delivered goods comply with what was agreed upon, or at least whether they meet the requirements applying to said goods in normal (business) transactions.
  2. Buyer shall check all delivered goods and in particular semi conductors and transformers, before using them.
  3. Possible visible shortcomings must be communicated in writing to user within three days following delivery. Non-visible shortcomings must be reported within three weeks following their detection but no later than 12 months following delivery.
  4. If in accordance with the previous paragraph, buyer files his complaint in due time, he shall still be held to take delivery and effect payment of the goods purchased. If buyer wishes to return defect goods, he shall do so following prior consent in writing from user.

Article 8    Remuneration, Price and Costs

  1. If user and buyer have agreed upon an administered price, user shall nevertheless be entitled to increase said price.
  2. User shall be allowed among others, to charge on price increases if changes in price have occurred between the moment the offer was made and the moment of execution of the agreement with respect to, e.g., exchange rates, salaries and wages, raw material, semi-finished products or packaging material.
  3. The prices given by user shall be exclusive of VAT and other government levies, as well as of the other expenses to be possibly made within the scope of the agreement, including shipment and administration costs, unless stated otherwise.

Article 9    Changes to the agreement

  1. If it is shown during the execution of the agreement that the work to be done needs to be changed and / or supplemented in order to ensure its proper execution, parties shall adapt the agreement accordingly in due time and in mutual consultations.
  2. If parties agree that the agreement needs to be changed and / or supplemented, this decision may influence the time of completion of the execution. User shall inform the buyer thereof as soon as possible.
  3. Should the change and / or supplement to the agreement have any financial and / or qualitative consequences, user shall inform buyer thereof in advance.
  4. If a fixed rate has been agreed upon then user shall indicate the degree to which the change or supplement to the agreement will result in an increase of said fixed rate.
  5. Contrary to the conditions governing this matter, user shall not be able to charge additional costs if the change or supplement is the result of circumstances attributable to user.

Article 10    Payment

  1. Payment must be made within 14 days from the date of invoice, in a way to be indicated by user and in the currency in which the goods were invoiced. Contestation of the amount of the invoices shall not suspend the fulfilment of the payment obligation
  2. User has the right to require payment in advance, cash, as require certainty for payment from the buyer
  3. If buyer fails to fulfil his payment obligation within the term of 14 days, then buyer shall be in default by operation of law. In that event, buyer shall owe an interest of 1% per month, unless the statutory interest rate is higher, in which case the statutory interest rate shall apply. The interest on the amount due and payable shall be calculated as from the day the buyer is in default until the moment he has paid the amount in full.
  4. User's claims against buyer shall become due on demand in the event that buyer is wound up, attached, declared bankrupt, or if a suspension of payment is granted.
  5. User shall be entitled to have the payments made by the buyer go first of all to reduce the costs, subsequently to reduce the interest still due and finally to reduce the principal sum and the current interest. User shall have the right, without this leading user to be in default, to refuse an offer for payment, if the buyer designates a different sequence of attribution. User shall be entitled to refuse full payment of the principal sum, if said payment does not include the interest still due, the current interest and the costs.
  6. User has the possibility to charge a credit limitation surcharge of 2%. This surcharge will not be charged if payment is made within 7 days from the date of invoice.

Article 11    Retention of Title

  1. All goods delivered by user, possibly also including designs, sketches, drawings, films, software, (electronic) files, etc., shall remain user's property until buyer has fulfilled all of his obligations under all agreements concluded with user.
  2. Buyer shall not be authorised to pledge or encumber in any way the goods falling under the retention of title.
  3. If third parties seize goods delivered subject to retention of title or wish to establish or assert a right to them, buyer shall be held to inform user thereof as soon as can reasonably expected.
  4. The buyer shall undertake to insure the goods delivered subject to retention of title and to keep them insured against damage caused by fire, explosion and water as well as against theft and make this insurance policy available for inspection on first demand.
  5. Goods delivered by user falling under the retention of title by virtue of the stipulations under 1. of the present article, may only be sold on within the framework of normal business activities and must never be used as instrument of payment.
  6. In the event that user wishes to exercise his ownership rights mentioned in the present article, buyer shall give user or third parties to be appointed by user, now for then, unconditional and irrevocable permission to access all sites and locations where user's property might be found and to take these goods back.

Article 12    Guarantee

  1. User shall guarantee that the goods to be delivered shall meet the usual requirements and standards that can be set for and made upon them.
  2. The guarantee mentioned under 1 shall equally apply if the goods to be delivered are destined for use abroad and if the buyer explicitly informed user of this use in writing the moment the agreement was entered into.
  3. The guarantee mentioned under 1 shall be valid for a period of 6 / 12 months following delivery. (see 6.)
  4. If the good to be delivered does not comply with said guarantee, user shall, at his discretion, replace or see to the repair of the good, within a reasonable period of time following receipt thereof, or, if the good cannot be returned in reason, following notification of the defect by the buyer. In the event the good is replaced, the buyer shall already now undertake to return the replaced good to user and to transfer ownership to user.
  5. The guarantee mentioned for this purpose shall not apply when the defect originated as the result of injudicious or improper use or when the buyer or third parties have introduced changes or tried to introduce changes to the good without user's consent in writing or if they have used it for purposes for which the good was not intended.
  6. If the guarantee given by user concerns a good produced by a third party, the guarantee shall be limited to the guarantee given by the producer of the good.

Article 13    Collection Charges

  1. If the buyer fails to fulfil his obligations (in due time) or defaults on them, then all reasonable costs incurred to have all extrajudicial costs and debts paid shall be borne by the buyer. If the buyer remains in default of payment within the set time period, he forfeits a immediately payable fine of 15% on the amount due at that moment. This with a minimum of € 50.
  2. If user demonstrates that he has incurred higher expenses, which were necessary in reason, said expenses shall also qualify for reimbursement.
  3. The reasonable judicial and execution costs possibly incurred shall equally be borne by buyer.
  4. Buyer shall owe interest over the made collection charges.

Article 14    Suspension and Dissolution

  1. User shall be authorised to suspend the fulfilment of the obligations under the agreement or to dissolve the agreement, in the event that:
    • buyer does not fulfil or does not fully fulfil his obligations resulting from the agreement
    • after the agreement has been concluded, user learns of circumstances giving good ground to fear that the buyer will not fulfil his obligations. If good ground exists to fear that the buyer will only partially or improperly fulfil his obligations, suspension shall only be allowed in so far the shortcoming justifies such action.
    • buyer was asked to furnish security to guarantee the fulfilment of his obligations resulting from the agreement when the contract was concluded and that this security is not provided or insufficient. As soon as security is furnished, the authorisation to suspend shall lapse, unless said fulfilment has been unreasonably delayed because of it.
  2. User shall furthermore be authorised to dissolve the agreement (have the agreement dissolved) if circumstances arise of such a nature that fulfilment of the obligations becomes impossible or can no longer be demanded in accordance with the requirements of reasonableness and fairness, or if other circumstances arise of such a nature that the unaltered maintenance of the agreement can no longer be demanded in all reasonableness.
  3. If the agreement is dissolved, the user's claims against the buyer shall be forthwith due and payable. If user suspends fulfilment of his obligations, he shall retain his rights under the law and the agreement.
  4. User shall always retain the right to claim damages.

Article 15    Return of Goods Put at Buyer's Disposal

  1. If user has put goods at buyer's disposal during and in connection with the execution of the agreement, buyer shall be held to return the delivered goods within 14 days in their original state, free of defects and in their entirety. If buyer fails to fulfil this obligation, all resulting costs shall be at buyer's expense.
  2. If, for any reason whatsoever, buyer still remains in default to fulfil the obligation mentioned under 1. after being warned to do so, user shall be entitled to recover the resulting damage and costs, including replacement costs, from buyer.

Article 16    Liability

  1. If the goods delivered by user are defective, user's liability vis à vis the buyer shall be limited to the arrangements made in the present terms and conditions under "Guarantee".
  2. If user is liable for direct damage, then said liability shall be limited to a maximum of the amount of the statement of expenses, at any rate that part of the agreement to which the liability relates. User's liability shall at all times be limited to a maximum equalling the amount of the payment to be made by user's insurer in the occurring event.
  3. Direct damage shall be understood to be exclusively:
    • the reasonable costs incurred to establish the cause and the volume of the damage, in so far said establishment relates to damage in the sense of the present terms and conditions
    • the reasonable costs possibly incurred to have user's faulty performance meet the conditions of the agreement, unless such faulty performance cannot be attributed to user;
    • the reasonable costs incurred to prevent or limit the damage, in so far buyer demonstrates that said costs have led to the limitation of direct damage as meant in the present general terms and conditions.
  4. User shall never be liable for indirect damage, including consequential damage, loss of profit, lost savings and damage due to business stagnation.
  5. The limitations of liability for direct damage contained in the present terms and conditions shall not apply if the damage is due to intentional act or omission or gross negligence on the part of user or his subordinates.

Article 17    Transfer of Risk

  1. The risk of loss of, or damage to the products being the subject of the agreement, shall be transferred to buyer the moment said products are judicially and/or actually delivered to buyer and therefore fall into the power of buyer or of third parties to be appointed by buyer.

Article 18    Force Majeure

  1. Parties shall not be held to fulfil any of their obligations if they are hindered to do so due to a circumstance through no fault of their own and which cannot be attributed to them by virtue of law, a legal action or generally accepted practice.
  2. In addition to the provisions of the law and the judge-made law in this respect, force majeure shall in the present general terms and conditions furthermore be understood to be any external circumstance, be it envisaged or not, on which user cannot have any influence but which prevents user from fulfilling his obligations. Industrial action at user's company shall also be understood to be a circumstance of force majeure.
  3. User shall also be entitled to invoke force majeure if the circumstance rendering (further) fulfilment of the obligation(s) impossible, commences after the point in time on which user should have fulfilled his obligation.
  4. Throughout the duration of the circumstances of force majeure, parties shall be entitled to suspend the fulfilment of their obligations. If this period lasts for more than two months, either of the parties shall be entitled to dissolve the agreement without any obligation to pay the opposite party damages.
  5. Insofar user has already partially fulfilled his obligations resulting from the agreement at the moment the circumstance of force majeure commenced or shall be able to fulfil them and insofar separate value can be attributed to the part already fulfilled or still to be fulfilled respectively, user shall be entitled to invoice the part already fulfilled or still to be fulfilled respectively. The buyer shall be held to pay this invoice as if it were a separate agreement.

Article 19    Safeguarding

  1. The buyer shall safeguard user against claims filed by third parties concerning intellectual property rights on material or data provided by the buyer, which shall be used for and during the execution of the agreement.
  2. If the buyer provides user with information carriers, electronic files or software etc., the former shall guarantee that said information carriers, electronic files or software are free of viruses and defects.

Article 20    Intellectual Property and Copyrights

  1. Without prejudice to the other stipulations of the present general terms and conditions, user shall reserve the rights and authorities to which user is entitled under the Copyright Act.
  2. The buyer shall not be allowed to introduce changes to the goods and material provided, unless the nature of the delivered goods and material dictates otherwise or if agreed upon otherwise in writing.
  3. The designs, sketches, drawings, films, software and other material or (electronic) files, possibly produced by the user within the framework of the agreement, shall remain user's property, irrespective of the fact whether they have been handed over to the buyer or to third parties, unless agreed upon otherwise in writing.
  4. All documents, such as designs, sketches, drawings, films, software, (electronic) files, etc., provided by user, shall be destined to be used by buyer exclusively and must not be reproduced, made public or brought to the notice of third parties by buyer without prior consent from user, unless the nature of the documents provided dictates otherwise.
  5. User shall reserve the right to use the knowledge gained due to the execution of the work for other purposes, in so far no confidential information shall be brought to the notice of third parties when doing so.

Article 21    Secrecy

  1. Both parties shall be bound to secrecy of all confidential information they have received within the scope of their agreement from each other or from another source. Information shall be considered to be confidential if the other party has indicated so or if the confidential character results from the nature of the information.
  2. If a statutory provision or a judicial decision compels user to convey confidential information to third parties designated by law or by the court and user cannot for that purpose invoke a legal right to refuse to give evidence or such a right acknowledged or allowed by the competent court, user shall not be held to pay damages or compensation and the opposite party shall not be entitled to demand the dissolution of the agreement on the ground of any damage resulting from said circumstance.

Article 22    Non-employment of the opposite party's personnel

  1. Throughout the duration of the agreement and for one year following termination thereof, buyer shall not in any way, hire or employ in any other way, be it directly or indirectly, staff of user or of enterprises whom user has engaged to execute the present agreement and who are (were) involved in the execution of the agreement, without prior proper businesslike consultation on this matter, all this in accordance with the requirements of reasonableness and fairness.

Article 23    Disputes

  1. The Court in user's place of business shall have exclusive jurisdiction to hear actions, unless the District Court is the competent Court. User shall nevertheless be entitled to submit the dispute to the Court deemed competent by the law.
  2. Parties shall only refer the matter to the court if they have done their utmost to solve the dispute in mutual consultations.

Article 24    Applicable Law

  1. Dutch law shall apply to each and every agreement between user and the buyer. The Vienna Sales Convention shall be explicitly excluded.

Article 25    Changes to the Terms and Conditions, interpretation and their location

  1. The present terms and conditions have been filed at the office of the Chamber of Commerce in Maastricht, under number 14621286.
  2. The Dutch version of these general terms and conditions prevails at all time in case of disputes with regard to the interpretation and purpose of these terms and conditions.
  3. The most recently filed version shall always apply, or, as the case may be, the version valid at the time the agreement was concluded.
    Berg en Terblijt , November 2015
    HAJÉ Electronics
    J.J.M. Biermans
1 x RG-58 Magnum Coax Cable 50 Ohm MIL-C-17F p/mtr1 x Fitted pressure switch for night light White1 x Rocker. 250Vac / 6A ø23mm - 2x on / off with green red. 250Vac1 x The smoke detector increases safety in the home1 x Lamp Ba9S socket ø10 x 28mm - 240V/14mA1 x Bourns Cermet trimmer 25 turn top-adjust 500E SIL (3296W-1-501F)1 x Light Bulb Wedge T10 12V15W Large Garden lighting1 x IR light lock - 10m for eg ramp, shops, etc.1 x Benchtop power supply with fixed voltage 13.8V 10 Amp (12A peak)1 x Fuse ceramic 6.3x32mm fast 30A/250V1 x 2m/70cm Ant.4.5/7.2dB L = 1.7 m N-Connector1 x Cable shoe male plug uninsulated 1.0-2.5mm² for MWS ..1 x Power Relay DPCO 30A - 60Vdc printversie1 x Pushbutton switch miniature (NO)- ø7mm- solder - yellow1 x Tantalum Capacitor 100uF/16V 20% e=5,0 - RoHS1 x 2 x female connector RJ-45 1:1 Lumberg1 x Mini Magnetic Antenna Scanner 0.5 - 2060 Mhz 32cm long1 x Modular Crimping tool for RJ10-RJ11-RJ12-RJ451 x DAB + Antenna 1mtr long and 4cm thick (F-connector)1 x Aluminium enclosure 37,5x72x43mm - Teko2 x L-Wall support 45cm for dish til 100cm mounting Aluminium1 x Coil 325-0909 77507 afm:7x7mm1 x Sil Reed Relay 1xmake 12V 1000E1 x Coax crimp plier for RG58, RG59, RG140, RG141, etc.1 x Lamp Ba9S socket ø10 x 28mm - 2.4V/1.25mA1 x Coil 325-0910 78057 afm:7x7mm1 x Digital Audio Board, for DR-135/235/435/735/061 x Cable 5P-DIN Male => 4x RCA Female 0.2m Blister1 x Coax switch 2-position with PL connectors 1.5KW (DC - 1000Mhz)1 x USB 3.0 Convert a USB-A Female to a USB-C Male1 x Increase your safety at home with this carbon monoxide detector.1 x Scanner Antenna Wide band 25-1300Mhz (TX on various bands)1 x Clip microphone with Earphone and PTT1 x 2.54 mm IDC socket without strain relief 14-pin - Assmann - Roh1 x Single Muff Headset with Boom Microphone & PTT1 x ø3mm white water clear 598mcd1 x Data control cable 2X 0.06mm with Shielding. Ø2mm white p/mtr1 x NTC zeskant schroef M3 1K1 x 8-Bit Microcontroller-Microcomputer DIL-281 x Stop mosquitoes, fly with this insect lamp2 x Scanner Antenne 25 - 2000Mhz met Magneetvoet lengte 75cm1 x Panel Fuse Holder 5x20mm slot - Littlefuse1 x Coax cable Teflon 50 Ohm RG-188 MIL-C-17F ø2.6mm Black p/mtr1 x The ES-5500G V3 is a 5-port Ethernet switch 10/100/1000 Mbps1 x UHF 450-470 Mhz Repeater Digitale en analoge repeater1 x 8 bit Shft Reg.With Inp.Latch DIL-161 x Eminent Ethernet PCI card 10/1001 x Pliers for connecting wires to LSA strips1 x 12 Volt car equipment with a 24 Volt battery (120W)1 x Sitecom ADSL Modem and Wireless 4-port1 x 2/70/23 Ant.4.5/8.3/11.7dB L = 1.8 Mtr1 x Pin Diode 30V-100mA DO-351 x Inductor 0805 - 10uH1 x MKT Capacitor 2,7nF/63V 5mm1 x Wire marker closed ø2.5 - 5mm l=3mm - '1'1 x Printing pen ø1,0mmx11,7mm1 x ø3mm orange water clear 610nm 1290mcd1 x MKT Capacitor 22nF/63V 5mm1 x Tabletop DAB+ / FM radio with 20 preset stations1 x OP AMP, DUAL AUDIO FET I/P SO-101 x Multi kabel tester UTP,FTP.SFTP and coaxcable2 x Tonna 9 430-440Mhz elements yagi antenna1 x The ES-5800G V3 is an 8-port Ethernet switch 10/100/1000 Mbps1 x Microswitch 6A/250Vac with 17,5mm lever1 x RCA female connector - 6.3 mm mono jack - RoHS1 x Wi-Fi Smart Video doorbell control via App. Battery powered1 x Temperature fuse Radial 2A 250V 102°C1 x S18 coil 0.114uH Freq.100Mhz Qu170 orange 3.5turns2 x Inverter for 220V devices connected to 110V1 x Invertor 24V => 220V 1700Watt1 x Schottky Rectifier, 45V 8A Single DO-201AD2 x IC socket gold-plated machine dil 28p e=7.62mm1 x Wi-Fi smart IP camera for outside, Turn / Tilt, Full-HD1080p1 x Mini-DIN receptable PCB angled - 6-pole1 x PCB relay SPCO 16A - e= 5mm - 24Vdc - low1 x Panel Fuse Holder 5x20mm - Stelvio1 x Marten Free for in home1 x PCB relay SPCO 12A - e= 3,5mm - 24Vac - low1 x TR5 Fuse Slow 2A - RoHS1 x Gutter bracket stainless steel for antenna1 x Power Relay DPCO 30A - 24Vdc printversie1 x TV Hirsman KOSWI-5 + KOKWI-5 (Male + Female)1 x TV/videocable coaxplug - coax contraplug, Black, 1.5m1 x 3.5 mm stereo jack socket panel mount - Marushin - RoHS1 x Flexible Antenna for 150-174MHz for IC-F15 / IC-F34 / IC-F30221 x Externe speaker voor oa IC-718, IC-7300, IC-7410,1 x PCB relay SPCO 12A - e= 3,5mm - 12Vdc - low2 x PCB relay SPCO 16A - e= 5mm - 12Vdc - low1 x Power Relay SPCO 30A - 24Vdc printuitvoering1 x HP 963 (3JA24AE) Magenta Ink Cartridge (original)1 x Coil 325-0912 78406 afm:10x10mm2 x Cable shoe plug fem uninsulated 1.0-2.5mm² for MWP..1 x Jack plug 6.3 mm mono metal right angle - Lumberg - RoHS1 x 2.5 x5mm yellow diffused 4.5 mcd 590m1 x TR5 Fuse Slow 3,15A1 x LED Indicators, 8mm Mount, 24Vdc, Bright Chrome Bezel1 x Dual Precis. CMOS Opamp. SO-81 x Thermostat1 x Ferrule blank ø0.75 x 6mm2 x Discone Antenna 25-1300 MHz L=1.7mtr PL version1 x unidir transil 6v8 1500w DO-2011 x arco467 - 105 - 580pF - 20x15mm1 x Power RelaySPCO 24Vdc - 20A faston1 x Microswitch SPDT 0.1A 125Vac1 x Light Bulb Wedge T10 12V10W Large Garden lighting1 x PCB relay SPCO 16A - e= 5mm - 12Vdc - low2 x Telescopic antenna 2M BNC connector2 x Rocker switch, Power, Light Blue Body 12Vdc 250Vac ø23mm1 x Mounting Wire Solid ø1,0mm² 900V - red p/m1 x 2 Meter - 70 Cm Flexible Antenna. Length:40 cm. 10W1 x PAL Male to F Female1 x Antenna UHF 430-470 MHz antenna1 x Fuseholder Panelmount for ø5x20mm slit2 x Fuse ceramic 5x20mm Slow 5A/250V1 x K72 Silicone spray 200ml1 x Microphone President 6pins with Up/Down1 x voltage converter 22.8V 45mA DIL-82 x Benchtop power supply with fixed voltage 13.8V 7 Amps (9A peak)1 x Car Alarm Simulator1 x Adapter XLR 3P Female to 6.3mm mono contra1 x Desoldering wick 1.27mm x 1.50 mtr (5-5L)1 x Battery holder for 1x 18650 with cable1 x Panel Mount LED Indicators 10mm With Wire Green 24V2 x arco466 - 70 - 480pF - 20x15mm1 x Power Relay SPCO 30A - 24Vac printuitvoering1 x Elco axial 10uF/100V ø8x11mm1 x Lamp Ba9S socket ø10 x 28mm - 12V/180mA1 x Panel Fuse Holder 5x20mm screw - Stelvio - CE / VDE / RoHS1 x BNC Female Crimp type RG59U1 x Travel adapter for in America with earthed1 x Microswitch SPDT 15A 250Vac1 x AC/DC Converters 15W 85-265VAC 19W (230 VAC) SO-8 (7pins)1 x Power Relay DPCO30A - 12Vdc printversie2 x MKT Capacitor 470nF/63V 7mm2 x Electronic transformer for halogen lamps 11.5V 20-70W2 x Brass spacer M5 int/int, length 18mm1 x AC/DC adapter for Intek RP-600 220v ->6VDC 300mA1 x Leads ø4mm silicon 1mm²/16A - 200cm - yellow - 934 094 1031 x Neg. Adj.Volt.Regulator -1,2 - -37V 1,5A TO-2201 x Speakermicrophone for All Icom Handheld1 x Panelmount receptable for DC powerplug ø2,5mm1 x Kenwood TK3501 e PMR446 incl.KNB-45 Battery & Charger KSC-352 x 3.5 mm mono jack socket panel mount - Lumberg - RoHS1 x Probe Switchable scaling factor : 1 : 101 x Coil 79024 afm:7x7mm1 x Universal Fast Charger USB-C Automatic Volt Selection 20Watt1 x Lamp Ba7S socket ø7 x 20mm -24V/125mA1 x Foil Trimmer 5.5 - 65pF 3pins Grid 10mm yellow1 x Earphone for Intek RP-6001 x TR5 Fuse Fast 500mA1 x Brass spacer M2,5 int/int, length 25mm1 x Data control cable 6 X 0.14mm foreclosure (MY 194) p/m.1 x 3.5mm stereo jack socket Isolated panel mount1 x 3 Core 220V cable 3 x 2.5mm² Black Round Rubber H05 RR-F p/mtr1 x Light Bulb Wedge T10 12V7W Large Garden lighting1 x Remote control for invertor1 x Pushbutton switch miniature (NO)- ø7mm- solder - blue1 x UHF DMR GPS Portable Transceiver1 x Wago Welding clamp 3-way for 2.5mm² cable p/pc1 x Tin box HF-tight (WxLxH) 74x74x30mm1 x Lamp with W2 socket ø10 x 26,8mm - 24V/3W2 x PAL Female Quick to RCA Female (Bulkhead)1 x Mounting Wire Solid ø1,0mm² 900V - yellow p/m1 x Mini-DIN receptable PCB angled - 7-pole1 x Inverter 12V => 220V 1700Watt1 x Microswitch SPDT 10A 250Vac1 x Table model power supply adjustable and fixed 5-15V 40A1 x Canon CLI-551GY gray ink cartridge (original)1 x Compact automatic battery charger between 2.2 and 10 Ah1 x Mini UHF T type Three Female1 x PCB relay SPCO 12A - e= 3,5mm - 24Vdc - low1 x President Johnson CB transceiver 40 Multi Channels FM/AM 12/24V2 x Set of oil socks1 x E10 Bulb ø10 x 28mm - 6V/350mA1 x AC/DC Converter Flyback 85 to 265VAC In SO-81 x MKS 2 Film Capacitors 2u2 63V 10% 7x16mm R5 Wima1 x Shrink tubing with adhesive black ø 3 - 1mm length 0.5 m1 x Mounting Wires ø0,5mm 10m - white - solid - blister1 x Duplexer 1.6-470 / 900-1300Mhz1 x Strain relief for SOC 14 - RoHS1 x Fuse ø10,3x38mm fast-acting - 25A / 600V ceramic1 x TR5 Fuse Slow 4A1 x Boxheader odds 2.54 mm print 60-pole1 x Ferrule blank ø1.50 x 10mm1 x E10 Lamp with lens ø9,5 x 24mm - 3,7V/300mA1 x 6.3 mm mono jack plug with strain relief gilded square black1 x Fuse ceramic 6.3x32mm fast 20A/250V2 x Cable shoe male plug uninsulated 0.65-1.0 mm² for MWS ..1 x Stabilized 9V 1Amp with DC plug 5.5 - 2.5mm also for Arduino1 x Cable Shoe ratchet crimping tool for insulated connectors1 x Coil 325-0913 77511 afm:10x10mm1 x TR5 Fuse Slow 2,5A - RoHS1 x Crimping pin flat plug 2,8mm Red Male1 x Elco radial 100uF/63V 10x12,5mm e=5mm 105°1 x E10 tubular lamp ø10 x 28mm - 6,5V/150mA1 x Foil Trimmer 5.5 - 15pF 3pins Grid 10mm blue1 x Boxheader odds 2.54 mm print 64-pole1 x Dipswitch 12-polig1 x Ferrule blank ø2.50 x 10mm1 x Elco radial 220uF/63V 10x16mm e=5mm 105° Discontinued1 x Wi-Fi outdoor smart IP camera, Water resistant, HD 720p1 x VGA Monitor HQ Cable Male 15polig HD - HD 15polig Male 10mtr1 x Ferrule blank ø1.00 x 10mm1 x AC - 12VDC with cigarette lighter socket adapter1 x Telephone cord flat 2x RJ11 Male 10mtr white1 x N-Channel Enhancement MOSFET SOT-2232 x Positive voltage regulator adjustable (LM317HV ) TO-2201 x Wireless Doorbell receiver, accessory for WIFICDP10GY, USB1 x Cable shoe plug male uninsulated 2,5-6,0 mm² for MWS..1 x Modular cable RJ11 (6P4C) Male - RJ45 (8P4C) Male 5mtr Black1 x Ext.Speaker with DC Power supply for IC-R8600 High1 x IGBT Single Transistor 10A 2.5V 65W 600V TO-263AB1 x Fuse ø10,3x38mm fast-acting - 15A / 600V ceramic1 x Trimmer top adjust Ø 15mm 500K1 x Dipswitch 8-polig1 x TV/videocable coaxplug - coax contraplug with filter white, 2.5m1 x Desoldering wick 2.8mm x 1.50 mtr (10-5L)1 x Inverter 24V => 220V 2000Watt (Peak 4000W) Pure sine wave1 x BNC Male Terminators 75 Ohm with Chain1 x Stubby UHF antenna 450-490 Mhz1 x Set of 6 jumper cables 1x Female and 1x Female 13cm1 x VGA Monitor HQ Cable Male 15polig HD - HD 15polig Female 1.8mtr1 x Aluminium enclosure 57,5x72x43mm - Teko1 x Set of 10 jumper cables 1x Female en 1x Female 30cm1 x T-adapter RJ-45 1xmale - 2xfemale1 x Single-ear boom microphone without PTT button1 x Halogen lamp collar P13,5S 6V 400mA 2,4W ø9,3x31mm1 x HP 963 (3JA26AE) ink cartridge black (original)1 x Alu Clear Anodized encloser (LxBxH) 220x165x51,5mm1 x LED Indicators, 8mm Mount, 24Vdc, Bright Chrome Bezel1 x Socket timer with day program max. 3500W1 x TV/videocable coaxplug-coax contraplug with filter, white, 1.5m1 x Microswitch SPDT 100mA 30V 6mm with detector switch1 x triac & SCR output Optocoupler 400v Rand Phs Triac Drvr SO-61 x Plug-in lamp small ø5 x 20mm - 6V/1W1 x Snap-In Elco 85° 4700uF/63V 30x40mm1 x ø3mm white water clear 2600mcd 30° 3.2V, 20mA1 x Shrink tubing with adhesive black ø 12 - 4 mm length 0.5 m1 x Temperature fuse Radial 5A 250V 165°C2 x WAGO Welding clamp mini 5-way mini 5x0.5-2.5 (0.50 - 2.50 mm²)1 x Round audio cable 7x 0.1mm with shielding, diam.Ø4.5mm p/mtr 1 x Fuse ø10,3x38mm fast-acting - 20A / 600V ceramic1 x Ceramic fuse 6.3 x25.4mm fast - 7A/250V Bussmann1 x Leads ø4mm silicon 1mm²/16A IEC - 1mtr - red1 x Nylon carrying bag for, among others, Kenwood NX-220E3, NX-320E31 x Temperatue Fuse 229°C/16A1 x Halogen lamp collar P13,5S 4V 850mA 3,4W ø9,3x31mm2 x PAL Female (PC Mount)1 x Prog. LwPwr. CMOS Opamp. SO-81 x Set of 10 jumper cables 1x Male and 1x Female 15cm1 x Satellite Coax cable 75 Ohm black p/mtr1 x Inductor 1206 5% 1000mA - 47nH1 x Cable shoe plug fem uninsulated 0.65-1.0 mm² for MWP ..1 x Extension cable set 4m1 x Fuse ceramic 5x20mm Slow 1A/250V1 x IC socket gold plated machined dil 18p e=7,62mm2 x Halogen lamp collar P13,5S 6,5V 700mA 4,55W ø9,3x31mm1 x VGA Monitor HQ Cable Male 15polig HD - HD 15polig Male 5mtr1 x Wirewound resistor AX5W 5% - 2.7E1 x Adapter 220V contra USA naar NL Stekker black1 x Fitted pressure switch for night light black1 x Dipswitch 10-polig1 x Silicone measuring cable ø0.75mm² Black P/mtr1 x Mounting Wire Solid ø1,0mm² 900V - black p/m1 x OPTOCOUPLER Darlington O/P SO-81 x Schottky diode sb-d 100V 0.1A DO-351 x Spindle 19mm for PT15.. red - Piher1 x Wi-Fi Smoke detector battery powered 85db white EN146041 x Volt Regulator +5.0V 1.5Amp TO-220iso1 x Marten Free on battery1 x Mobile Mounting Bracket for IC-7061 x Multifuse 30V 6000mA - Bourns1 x Inverter 24V => 220V 150Watt1 x Solder support 7-way1 x VHF Digital & FM Repeater1 x TV/videocable coaxplug - coax contraplug with filter white, 5.0m1 x 3 1/2 Digit digital multimeter with 24 measuring ranges.1 x Speaker for the IC-7300 & IC-R86001 x Deutsch DT 2 Pin Black Connector Kit 18-161 x Microswitch 5A/250Vac with short rollever1 x Alu Clear Anodized encloser (LxBxH) 160x165x30,5mm1 x Soldering support 10-fold1 x Fuse 5x20mm medium slow - 800mA / 250V1 x Fuse 5x20mm Ultra fast - 10A / 250V1 x Boxheader odds 2.54 mm print 50-pole1 x IC socket gold plated machined dil 22p e=7,62mm1 x Power supply chassis part 125V 7Amp 2-way for NEK 21 x Mounting bracket for roof rack tube (car roof rack attachment)1 x Mini-DIN receptable PCB angled - 8-pole1 x Electronic transformer for halogen lamps 11.5V 35-105W1 x SP21 Antenna Mirror Support1 x Halogen lamp collar P13,5S 5,2V 850mA 4,42W ø9,3x31mm1 x Chassis 3.5 mm stereo switch to open - Marushin - RoHS1 x USB-C 3.2 Gen 2 Adapter Adapter Fem/Fem 4K@60Hz 10Gbps1 x Cable shoe flat plug pin 4,8x0,8mm Blue1 x Wirewound resistor AX5W 5% - 0.56E1 x E10 Globe lamp ø15 x 28mm - 12V/350mA1 x Heat shrink tubing ø 9.5 - 4.7mm black p/mtr1 x 6.3 mm stereo jack socket + 2 schak.haaks1 x Aircomm Premium Coax Cable 50 Ohm p/mtr1 x vacuum cleaner cord 6mtr 2x0.75mm grey1 x Cable 5P-DIN Male => 2x RCA Female (pin 3&5) 0.2m Blister1 x Pushbutton switch miniature (NO)- ø7mm- solder - green1 x 50- 1500MHz medium power high linearity amplifier SOT-891 x Wall Charger 12V 500 Mah voor IC-E91 & IC-E92D & IC-E80D1 x Alu Clear Anodized encloser (LxBxH) 220x165x30,5mm1 x VHF 136-174 Mhz NEXEDGE Digital-Analogue Repeater-Base Station1 x VGA Monitor HQ Cable Male 15polig HD - HD 15polig Female 3mtr1 x Li-ion Battery, Slim, 1100mAh TH-D74E1 x TV Female to RCA Phone Female2 x Panel Mount LED Indicators 10mm with Wire Red 24V1 x Shrink tubing with adhesive black ø 6 - 2mm length 0.5 m1 x Mini-DIN receptable PCB angled - 5-pole1 x Clixon open 160c / close 130c1 x Antenna 115-174Mhz 3,4DB length 1,7 mtr1 x Ferrule blank ø0.75 x 10mm.1 x Elco radial 470uF/50V 13x22mm e=5mm 105° Low ESR1 x Dipswitch 6-polig1 x Power plug AC 250V 1.5A 2-way for NEB 21 x Marten Free for in car1 x Elco radial 4700uF/16V 18x37mm1 x Optical Toslink cable for digital data 1.5mtr1 x TR5 Fuse Slow 1,6A1 x Panel Mount LED Indicators 10mm With Wire Yellow 24V1 x VGA Monitor HQ Cable Male 15polig HD - HD 15polig Female 5mtr1 x BNC Female to UHF Female1 x Leads ø4mm silicon 1mm²/16A IEC - 1mtr - red1 x Brass spacer M5 int/int, length 10mm1 x Stubby Antenna 160-174 MHz for F15, F25, F311 x TV/videocable coaxplug - coax contraplug, white, 5.0m, blister1 x NChl.MOSFET 240V 0.35A SOT-2231 x Elme Nylon-Glass desoldeerpomp with internal bayonet point.1 x Desoldering wick 1.9mm x 1.50 mtr (7-5L)1 x ø3mm bi-polar green/yellow 3-terminals common cathode1 x Shrink tubing with adhesive black ø 18 - 6mm length 0.5 m1 x Multifuse 30V 4000mA - Bourns1 x Leads ø4mm silicon 1mm²/16A IEC - 1mtr - black1 x Boxheader odds 2.54 mm print 40-pole1 x BNC Female Bulkhead Crimp type RG1741 x Temperature fuse Axial 2A 250Vac 102°C1 x Temperature-compensated voltage regulator for 12V fans1 x Lamp Ba9S socket ø10 x 28mm - 24V / 80mA1 x Wire fuseholder 5x20mm1 x PAL Female Chassis Mount with Flange1 x 2.5 x5mm green diffuse 565m 4.5mcd2 x Jack socket 6.3 mm mono with built-in switch1 x Base Station Speaker for the IC-7700 and IC-78001 x Dipswitch 7-polig1 x Wirewound resistor 5W 1K 5% ø6.5x17.5mm1 x Elco radial 470uF/63V 12.5x25mm e=5mm 85°1 x Leads ø4mm silicon 1mm²/16A - 200cm - green - 934 094 1041 x Ratchet crimping plier for non insulated terminals1 x BNC Female Crimp type RG58U1 x Fuse Holder PCB for ø5x20mm fuses (part 1)1 x Chassis section single-gage panel mounting ex 5.5 / inw 2.5mm1 x TV/videocable coaxplug - coax contraplug, white, 7.5m, blister1 x Mounting Wire Solid ø1,0mm² 900V - blue p/m2 x Fuse ø10,3x38mm fast-acting - 10A / 600V ceramic1 x Basic antenna freq. 420-470 MHz 6 DB Gain 200W1 x Printing pen ø1,0mmx11,7mm p/1001 x Ecoflex 15 Coax Cable 50 Ohm p/mtr1 x Led lamp 12V Yellow - Chrome housing1 x Alu Clear Anodized encloser (LxBxH) 220x125x51,5mm1 x Crimping pin flat plug 4,8mm Red Male1 x T-adapter RJ-45 3xfemale1 x Temperatue Fuse 120°C/10A1 x Halogen lamp collar P13,5S 5,2V 500mA 2,6W ø9,3x31mm1 x Mounting Wire Solid ø1,0mm² 900V - green p/m1 x Fuse ceramic 6.3x32mm fast 10A/250V1 x Rocker switch, On / Off, Body Lights Red 12Vdc 250Vac ø23mm2 x Dual Low-Noise Rail-To-Rail Operational Amplifier SO-81 x Wirewound resistor AX5W 5% - 0.39E1 x Digital multimeter with automatic range adjustment1 x Kenwood TK3501 e PMR446 incl.KNB-45 Battery & Charger KSC-351 x Reserve point VTDESOL31 x Telephone cord flat 2x RJ11 Male 5mtr white1 x Fuse ceramic 6.3x32mm fast 12A/250V1 x 2 way car splitter 12V with cable1 x Making wiring diagrams and drawings permeable1 x Extra wireless smart doorbell bell for the video doorbells1 x Adapter BNC (F) -> 2x Banana (M)1 x Inductor 1206 5% 900mA - 68nH1 x Case clamp for auto1 x Speaker Microphone1 x 2x5mm yellow diffused 590nm 4.5mcd1 x Jack chassis part 6.3 mm mono Geisol. with built-in switch1 x Panelmount receptable for DC powerplug ø2,1mm1 x Wirewound resistor AX5W 5% - 5K61 x RCA connector - RCA plug contra angles gold plated1 x 2.5 x5mm red diffused 627nm 7.5mcd1 x Fuse ceramic 6.3x32mm fast 15A/250V1 x Lamp Ba9S socket ø10 x 28mm - 24V/130mA1 x Trimmer mini small horizontal 1-turn ø6,3mm Carbon 5M1 x NPN 50V 50mA 10K/10K hfe:30 or more TO-92smal1 x Styroflex Capacitor. 470PF - K - 4X10mm - AX1 x Fuse ø6,3x32mm fast-acting - 35A1 x PCB pin ø1,3x9,7mm silver plated1 x HP 305 (3YM60AE) color ink cartridge (original)1 x Aluminium enclosure 143x72x28mm - Teko1 x Mini-DIN receptable PCB angled - 4-pole1 x HP 963 (3JA25AE) yellow ink cartridge (original)1 x Aluminium enclosure 102x72x43mm - Teko1 x Heat Shrink various sizes ø1 - ø2 - ø3 - ø4.5 - ø6 - ø9mm1 x Telescope Antenna 144-430 MHz BNC-Conn. with hinge 10W1 x Multifuse 30V 2500mA - Bourns1 x BNC Female Crimp type RG59U1 x 10 pcs Crocodile testleads in 5 colors1 x Dil reed relay 1xmake 12Vdc - 1000E1 x HC-06 Bluetooth Transceiver Module1 x ø3mm yellow diffuus 590nm 240mcd1 x Extension cable with 2x FME Female 10mtr RG58 Procom1 x PNP 45V 200mA 150mW TO-2361 x Satellite cable with 2x F-Male connector 1.5m white 75 Ohm1 x Fuse ø6,3x32mm fast-acting - 25A1 x unidir transil 6v8 1500w DO-2011 x Panelmount receptable for MP 201(L)1 x Rocker. ø23mm 6A / 250Vac on / off with green lights 12Vdc1 x Alu Clear Anodized encloser (LxBxH) 160x165x51,5mm1 x Multifuse 30V 3000mA - Bourns1 x Halogen lamp collar P13.5S 5,5V 1000mA ø9,3x31mm1 x Extension cable with 2x FME Female 4mtr RG58 Procom1 x RJ-45 CAT6 plug shielded with wire guide and tulle1 x Inverter 24V => 220V 1000Watt1 x L9110S Motor Driver 12V 800mA1 x Walkie-talkie holder for car ventilation grille1 x 4 Way car splitter 12V + USB1 x Quad Comparator Low Pwr. SO-141 x Multifuse 30V 5000mA - Bourns1 x Brass spacer M2,5 int/int, length 30mm1 x Coax switch 4-position with N connectors 1KW (DC to 800Mhz)1 x HP 963 (3JA23AE) Cyan Ink Cartridge (original)1 x Brass spacer M3 int/int, length 63mm1 x Window clip mounting fixation BNC 2.5m coax1 x ø3mm bipolar red/green 3-terminal common cathode 60°1 x Multifuse 30V 2300mA - Bourns1 x VGA Monitor Cable Male 15polig HD - HD 15polig Female 3mtr1 x Alu Clear Anodized encloser (LxBxH) 160x125x51,5mm1 x Set of 10 jumper cables 1x Male and 1x Male 15cm1 x 2m/70cm flex handheld with SMA connector2 x Mosfet 3 Phase Bridge Driver 12V-20V 350mA SO-281 x Dipswitch 9-polig1 x Inductor 1206 5% 850mA - 100nH1 x Aluminium enclosure 143x72x43mm - Teko1 x Leads ø4mm silicon 1mm²/16A IEC - 1mtr - black1 x Trimmer mini small horizontal 1-turn ø6,3mm Carbon 2M51 x Extension cable with 2x FME Female 2mtr RG58 Procom1 x Fuse ø10,3x38mm fast-acting - 12A / 600V ceramic1 x Fuse ø10,3x38mm fast-acting - 30A / 600V ceramic1 x Inductor 0603 - 1800nH 10% (LQM18NN1R8K00D)1 x 3.5 mm stereo jack socket print angled with switch1 x Silicone measuring cable ø0.75mm² Red P/mtr1 x Male 3.5mm mono plug - Tulip plug kontra1 x Radio holder for car door1 x 6.3 mm mono jack plug with strain relief gilded odds r1 x Mini-DIN receptable PCB angled - 9-pole1 x Stubby antenna 150-162 MHz for F15, F25, F31, F30021 x TRAN DIGITL NPN 50V 50MA SOT-3461 x HDMI ™ to SCART Converter connect HDMI to scart1 x Sil Reed Relay 1xmake 12V 1000E with diode1 x BNC 350-520 Mhz UHF antenna 0.2 mtr1 x High-current switching, NPN, 50V 5A SOT4281 x E10 Lamp with lens ø9,5 x 24mm - 2,5V/200mA1 x Pushbutton switch miniature (NO)- ø7mm- solder - white1 x Inductor 1206 10% 1000mA - 33nH1 x Cable 5P DIN Female (pin 1&4) => 2 x RCA Male 0.2m Blister1 x Desoldering pump with heater 30W1 x Rockerswitch 6A / 250V on / off + LED red ø23mm - RoHS1 x Foil Trimmer 2.5 - 7.5 mm red 27pF 3pins Grid1 x Modular Plug RJ-45 8P10C Round Cable 10 pol1 x UHF Digital & FM Repeater / Bassis1 x Pcb Mini-USB type A 5 pole1 x UHF Bakelite Insulation Square Chassis1 x DIN socket - 7-pole print right-angled - Lumberg1 x Antenna CB Mobile Magnetic Whip Stainless Steel 175cm 5000/200001 x DIN socket - 8-pole print right-angled - Lumberg1 x ø1.8mm - 12Vdc - 2180mcd 30° - cold white1 x Industrial Relays 3PCO 10A - 230Vac - 11p octal1 x Transistor socket 8 contacts1 x Polyurethane glass sleeve 3mm inw red p/mtr1 x DIN socket - 6-pole print right-angled - Lumberg1 x Analoge voltage panel meter 15V DC 70 x 60mm1 x Jack plug 3.5 mm mono metal with tulle - Marushin1 x High quality High Speed HDMI Cable 10mtr1 x Rocker. 250Vac / 6A ø23mm - 2x on / off with red red. 250Vac1 x SI Stabilizer Diode 30V 0.1A DO-351 x IC socket gold plated machined dil 24p e=7,62mm1 x Connect a device with a VGA connection to an HDMI input1 x USB A to mini B 5 pin for connecting digital cameras1 x USB 2.0 Cable USB-C Male - USB A Male 1.00 m Black1 x Convert a USB-C port to an RJ45 port1 x Crimping pin flat plug 6,3mm Red Male1 x Cable 5P-DIN Male => 4x RCA Male 1.2m Blister1 x USB-C male to USB-C female 60W 4K-60Hz 5Gbps1 x USB-C male to USB-C female 60W 4K-60Hz 5Gbps1 x USB 2.0 Cable Type A M/F 1.8m1 x Adapter 220V contra USA naar NL Stekker White1 x Fly repeller with soft-stop fan blades.1 x Sil Reed Relay 1xmake 5V 500E with diode1 x Set of 10 jumper cables 1x Female en 1x Female 15cm1 x Wi-Fi smart IP camera within HD 1080p1 x Foil Trimmer 2 - 12pF 2pins Grid 5.5 mm white1 x 12 Volt car equipment with a 24 Volt battery (240W)1 x Basic antenna freq. 890-960 MHz 6 DB Gain1 x 2 Way car splitter 12V1 x E10 Lamp with lens ø9,5 x 24mm - 2,2V/300mA1 x AC/DC Converter Flyback 85V to 265V AC In 3W (7 pins) SO-81 x Negative voltage regulator up to 37V TO-2201 x Extension cable 220V 3x1.5mm² 5mtr White with protective earth1 x Fuse ceramic 6.3x32mm fast 16A/500V1 x Adapter BNC (M) -> 2x Banana (F)1 x Hirschmann KOKA799 Digital TV-Radio coaxcable white 75 Ohm p/mtr1 x TV, Smartphone and Smartmedia Screen cleaner set1 x Lamp Ba9S socket ø10 x 28mm - 12V/330mA1 x Cable 5P DIN Female => 4 x RCA Male 0.2m Blister1 x RP-SMA Female to N Female1 x Set D Sub Jack Screw 48.77mm UNC4-40 (2x)1 x Test terminal with cable input of 0.64mm - black 973 592 1001 x N Female crimp type RG81 x Sil Reed Relay 1xmake 24V 2000E1 x Edge wheel for PT15 red - Piher1 x Coax switch 2-position with N connectors 1.5KW (DC to 3000Mhz)1 x IC socket gold plated machined dil 28p e=15,24mm1 x Brass spacer M2,5 int/int, length 20mm2 x Motorcycle helmet set with boommike for kenwood1 x Soldertip TCP screwdriver short 0,8/2,4mm 425°C1 x Carbon film resistor 1W 5% - 3.9E1 x Varistor SIOV - S20 K550 550V 1,00W ø21,5x7,5mm1 x FME Female to Mini UHF Female1 x TNC Male T type to Double BNC Female1 x Smd electrolytic capacitor Radial Can 10uF 16V (Ø4mm x 5.4mm)
Closed.
Manufacturers
Reviews
BC556B
BC556B
€0,15

nice...